Cold-bent steel
25 mm precision tube, bent cold in one pass so the steel never weakens at the curve. A frame carries 150 kg.

follows useWerkform makes tubular-steel chairs, tables and lamps by hand in Dessau, a few streets from the Bauhaus. Made to order, from €420.

The S1 cantilever chair. Scroll to look closer.
Pick the frame, the seat and the extras. We bend it in Dessau and ship it in six weeks.
Frame Chrome
Seat Black Eisengarn
Extras
€890Made to order in about six weeks
Order this chairThe same steel, cloth and joints the Bauhaus workshops used, made to be repaired rather than replaced.
25 mm precision tube, bent cold in one pass so the steel never weakens at the curve. A frame carries 150 kg.

Iron yarn: cotton thread waxed until it shines, the same cloth the Bauhaus weavers used. It gets softer every year.

Every piece ships with a parts kit and a serial number. Seats, glides and collars stay in stock for as long as we exist.

The Kugel lamp: an opal glass globe on the same chrome tube, wired by hand and tested for twelve hours.

Nothing leaves our building on Kühnauer Straße between the raw tube and the finished chair.

1Each tube is cut to length on a cold saw, to half a millimetre.

2Four bends on a 1960s mandrel bender, without heat.

3One weld, hidden under the seat, then chrome or powder coat.

4The seat is stretched wet and stitched, so it tightens as it dries.

Prices
Write about a chair, a lamp, a repair, or a visit to the open workshop on Thursday afternoons.
[email protected]Kühnauer Straße, Dessau-Roßlau · Open workshop Thursdays 14:00 to 18:00